You’re in the Industrial section of the website.Switch to: Residential  Β·  Commercial

3E ELECTRICAL · TORONTO INDUSTRIAL

Industrial Electrician in Toronto

Machine hookups, 3-phase power, service upgrades and distribution maintenance for Toronto plants, warehouses and commercial buildings.

Industrial electrical contractor in Toronto: high-bay lighting across a working warehouse

Based in Toronto’s west end.

Our crews cover Toronto’s employment areas across the city, from the Weston Road corridor to the Port Lands.

Toronto’s industry sits in pockets, not one big district, and each pocket runs different buildings: food plants in the Stockyards, small shops along Weston Road, warehouses in Leaside, heavy industry on the waterfront. Owners hire us directly and deal with the people doing the work. For the employment lands west of the city, see our Etobicoke industrial electrical contractor page. For general commercial work, our commercial electricians page covers Toronto and the GTA.

★ 4.9 from 200+ reviews · ESA-licensed · ECRA 7014948 · Engineer-led · Liability insurance, WSIB covered

Tap a photo to view it full size.

Machine Hookups

Power for new and relocated equipment: machine hookups, disconnects and equipment connections for plant moves and new production lines. We size the feed to the machine, coordinate with your equipment supplier and the ESA inspector, and leave the line ready to run.

Equipment hookup with a transformer and distribution panel in a Toronto plant

600 Volt 3-Phase Power

Adding or expanding 3-phase power for equipment that needs it, including 347/600 volt distribution. If your building does not have 3-phase today, we will tell you straight what it takes to get it.

Industrial electrical crew installing conduit from a scissor lift in a Toronto plant

400 Amp Panel Upgrades

Commercial panel upgrades and service entrance upgrades, 400 amps and larger, for buildings outgrowing their service. Capacity for new production lines, compressors, HVAC and chargers, planned around your operating hours.

Panel and service upgrades by an industrial electrical contractor in Toronto

Switchgear & Switchboards

New switchgear and upgraded switchboards, installed with utility and ESA coordination. Switchgear maintenance and switchboard maintenance on a schedule: cleaning, torque checks, testing and documented deficiencies, quoted before they become shutdowns.

Switchgear and distribution work by an industrial electrical contractor in Toronto

Transformers, Buck & Step-Down

Transformer installation and replacement, including buck transformers and step-down transformers that give a machine the exact voltage it was built for. Splitter boards, large feeders and distribution maintenance that finds the failing breaker before it stops production.

Plant floor served by transformer and distribution upgrades in Toronto

Infrared Scanning

Thermographic inspection of panels, switchgear and connections while they carry load. A connection running hot shows up on the scan long before it fails, so it can be repaired on your schedule instead of during a shutdown. Infrared scanning is part of our switchgear maintenance visits, or a standalone inspection for your insurance and fire code records.

Panels & switchboards
Switchgear & bus connections
Written report with photos

Surge Protection for Sensitive Equipment

One surge can take out drives, PLC controls, CNC machines and IT equipment. We install surge protection at the service entrance and at distribution panels, sized for the equipment it protects. It is the cheapest insurance a plant can buy.

Siemens surge protection device installed by an industrial electrician in Toronto

Emergency Lighting Inspections

Emergency lighting and exit signage, tested, repaired and documented for fire code compliance: battery units, remote heads and annual verification for commercial and industrial buildings.

Emergency lighting and exit sign inspection in a Toronto commercial building

New High Bay Lighting

New high bay lighting and LED retrofits for production floors and warehouses, designed for the work done under them, not just the fixture count. Brighter floors, lower hydro bills, and no more lamp changes at height.

New high bay LED lighting in a finished Toronto industrial space

Business EV Charging

Level 2 charging for fleets and workplaces, engineered from a proper load calculation. It is how we charged two electric delivery vans on an existing 50-amp circuit, without a service upgrade.

Business EV charging installed by an industrial electrical contractor in Toronto

Industrial electrical work in Toronto by 3e

3e crew installing conduit from a scissor lift in a Toronto warehouse

Conduit installation from a scissor lift.

Linear LED lighting in a finished industrial space

Linear LED lighting in a finished industrial space.

Equipment hookup with a transformer and distribution panel

Equipment hookup: machine power from a transformer and panel.

Your industrial electrical contractor in Toronto’s industrial zones

As a commercial electrical contractor in Toronto, we work where the city’s industry actually is: in the employment areas below, each one a short run from our west-end base.

The Stockyards District

St. Clair Ave W Β· Keele St Β· Weston Rd, food processing and light industrial on designated employment lands, the closest true industrial pocket to our west-end base.

Weston & Mount Dennis

Weston Rd Β· Rogers Rd Β· Black Creek Dr, small manufacturing, shops and trades strung along the Weston Road corridor.

The Junction’s Industrial Streets

Pelham Ave Β· Mulock Ave Β· Junction Rd, small plants and trades shops tucked behind the Junction’s retail strip.

Castlefield & Dufferin

Castlefield Ave Β· Dufferin St Β· Glencairn Ave, the furniture and design light-industrial district around Dufferin and Glencairn.

Leaside Business Park

Laird Dr Β· Eglinton Ave E Β· Wicksteed Ave, light industrial, warehouses and film-adjacent shops in Leaside.

Eastern Avenue & the Port Lands

Eastern Ave Β· Commissioners St Β· Cherry St, concrete plants, studios and terminals, the heavier industry along the waterfront.

Consumers Road, North York

Consumers Rd Β· Victoria Park Ave Β· Sheppard Ave E, office-industrial park stock in North York.

Why owners deal direct with an industrial electrical contractor

One call, direct

One call, to the contractor doing the work. No general contractor markup, no hand-offs, no waiting on someone else’s schedule. You describe the problem or the plan; we quote it, you approve it, we do it.

Engineer-led

3e is led by a licensed professional engineer. Load calculations, service sizing and distribution design are done in-house. It is how a facility that was quoted a new transformer ended up charging on the service it already had.

Licensed and covered

ESA-licensed electrical contractor (ECRA 7014948), liability insurance and WSIB coverage in place, permits and inspections handled, and our workmanship backed by the DecadeShieldβ„’ 10-year warranty.

Questions facility managers ask us

We just bought a machine that needs 3-phase power. Can you hook it up?

Yes. Machine and equipment hookups are core work for us. We confirm the machine’s voltage and load, size the circuit and disconnect, run the feed and coordinate the ESA inspection, so the equipment is ready when your installer commissions it.

Our plant is outgrowing its electrical service. Can you upgrade us to 400 amps or more?

Yes. We start with a load calculation on your existing service. Sometimes capacity is already there and unused. Where a service upgrade is needed, we handle the design, the utility coordination, permits and the changeover, planned to keep your downtime as short as the work allows.

Can 3-phase power be added to a building that doesn’t have it?

Often, yes. It depends on what the utility has on your street and what your equipment actually needs. Sometimes the answer is a service change, sometimes a phase solution on site. We will assess your building and give you the real options and a clear quote before you commit.

Do you maintain switchgear and switchboards?

Yes. Switchgear maintenance and switchboard maintenance are scheduled work for us: cleaning, torque and connection checks, infrared scanning under load, and a written record of deficiencies with repairs quoted. Most facilities book it once a year, often alongside emergency lighting testing.

Do you maintain and inspect electrical distribution for industrial buildings?

Yes. Distribution maintenance and inspections for plants, warehouses and commercial buildings: panels, disconnects and feeders checked, deficiencies documented, and repairs quoted before small problems become shutdowns. Emergency lighting testing and verification can be part of the same visit.

Can you protect our equipment from power surges?

Yes. We install surge protection devices at the service entrance and at distribution panels feeding sensitive equipment: drives, controls, CNC machines and IT. Protection is layered and sized to the equipment, and it is far cheaper than one surge-damaged control board.

Can you replace our warehouse lighting with LED high bays?

Yes. New high bay lighting and LED retrofits are core work for us. We lay out the lighting for the work done under it, handle the fixtures, lifts and controls, and phase the work so your floor keeps running.

Do you work for building owners directly, or only through general contractors?

Directly. Owners and facility managers hire us themselves. You get our quote, our schedule and our crew, with no contractor markup in between.

Who do we call if our facility loses power?

Call us at 647-560-7995. A facility that is down is the call we prioritize. We will tell you on the phone what we can do and when we can be there.

Tell us what your building needs.

A machine to hook up, a service to upgrade, a plant to protect. Get a clear quote from the industrial electrical contractor in Toronto who will do the work.

Request a QuoteCall 647-560-7995