3e Electrical Construction — Toronto
Electrician in Toronto
Licensed electricians based in Toronto’s west end, working across the city — in homes, and in the buildings where Toronto works. Panel upgrades, clevis and service repairs, troubleshooting and renovation wiring; electrical distribution maintenance and planned shutdowns for commercial and industrial buildings. Every job quoted in writing first, permitted where it needs to be, and backed by a 10-year workmanship warranty.
We quote it. You approve it. We do it. ⚡
Request a Quote★★★★★ 4.9 from 200+ reviews
Also: electrician in Swansea · electrician in Bloor West Village · all service areas
The mast letting go on Grenadier Road
On Grenadier Road, beside High Park, the hardware holding Toronto Hydro’s lines to the house — the clevis, up at the service mast — had failed. That hardware belongs to the homeowner, not to Hydro, so it was our call to take: a new clevis fitted properly, the service made sound, and the paper trail handled the way inspectors want to see it — ESA notification, a final inspection, and Toronto Hydro’s reconnection coordinated as its own step.
It’s the kind of Toronto job that never makes a highlight reel and absolutely has to be right: century-old brick, an overhead service, mature trees, and a utility timeline that doesn’t bend. It’s also the kind of job most small shops pass on. We don’t.






Tap a photo to view it full size.
What we do in Toronto
From the fuse panel of a century home to the main distribution of an industrial building — the residential work Toronto homes ask for, and the bigger commercial work smaller shops can’t take on.
Electrical distribution & switchgear
Main services, distribution panels and switchgear in commercial and industrial buildings — maintained, tested and repaired, including three-phase systems up to 1,200 amps. Commercial electrical →
Panel upgrades
Fuse panels and 60- or 100-amp services replaced with modern breaker panels sized for how you actually live — kitchens, EVs, hot tubs and all. Panel upgrades →
Building electrical maintenance
Ongoing maintenance for facilities: infrared scanning of distribution under load, fuse and breaker condition checks, and the defects found fixed before they become outages.
Clevis & service mast repair
The hardware where Hydro’s lines meet your house is yours to maintain. Rusted, pulling away, or flagged by Hydro or ESA, we replace it and coordinate the disconnect and reconnect. Clevis repair →
Planned shutdowns
Work that needs the power off gets planned like it matters: shutdowns and restorations coordinated with the utility and ESA, scheduled around your operation — weekends included.
Troubleshooting & repairs
Breakers that trip, circuits that die and come back, faults nobody has found yet. We test and trace until the cause shows itself, then fix the cause — not the symptom.
Emergency lighting & life safety
Emergency lighting testing and sign-off, exit signs, and smoke and carbon monoxide compliance for commercial spaces and multi-unit buildings. Emergency lighting →
Renovation wiring
Kitchens, basements and additions wired into older electrical systems — planned against your panel’s real capacity, permitted and inspected. Renovation wiring →
Keeping 30,000 square feet powered on Meridian Road
On Meridian Road, we maintain the electrical distribution for Cobot Intelligence — a working industrial building of about 30,000 square feet, fed by a 1,200-amp, three-phase, 120/208-volt service. A service that size doesn’t forgive neglect: when something in it fails, it fails in front of a whole operation.
The maintenance is deliberately unglamorous. Infrared scans of the distribution under load, so a fuse or connection that’s heating up is found while it’s still a finding and not an outage. Fuse condition and age checks. And the work that needs the power off done as a planned shutdown — like the Saturday shutdown and restoration we ran in October, scheduled around the building instead of against it. That’s the commercial half of this company: the same diagnostic discipline as a house call, at industrial scale.

Tap a photo to view it full size.











Toronto work, recently
A few streets’ worth of what this city’s homes have asked us for lately — the commercial half of the book is the Meridian Road building above.
A basement renovation in The Junction. On Maria Street, a full basement renovation wired into an older home’s electrical system: switches, dimmers and smart dimmers, receptacles throughout, and new protected circuits — planned against what the panel could honestly carry, and finished to inspection.
The breaker that tripped every time the oven ran. On Edwin Avenue, near Dupont, a breaker kept cutting out with the gas range. On the panel we found circuits sharing runs they shouldn’t have shared — and an arc-fault breaker being upset by a humidifier on its circuit. We separated the circuits onto their own breakers, installed two basement lights, and found live knob-and-tube still in service — flagged honestly, with a follow-up visit booked to inspect it properly. The customer paid in full and left a five-star review the same morning.
A penthouse rack gone dark at Old Mill. When the power unit in a home theatre rack failed, the Sonos zones, Lutron controls and stereo went with it. Everything was moved onto protected power the same day and the system came back to life — and when a like-for-like replacement for the failed unit priced out at $1,250, our advice was not to buy it: the protection the system actually needs costs a fraction of that.
★★★★★
“Done perfectly, in good time. Excellent all around. I highly recommend 3e electrical!”
— Vera’s 5-star Google review, Rockcliffe–Smythe, November 2026
★★★★★
Tricky wiring troubleshooting, done properly — with plain-English explanations along the way, and a return visit for a minor follow-up.
— Vu’s 5-star Google review, Swansea, October 2026
★★★★★
A tripping breaker traced and repaired, basement lights installed, and the knob-and-tube in the walls flagged honestly for a follow-up.
— Katherine’s 5-star Google review, The Junction, October 2026
For Toronto businesses and buildings
If you run a facility, this is the half of 3e Electrical Construction built for you.
Commercial electrical fails differently from residential: it fails during business hours, in front of customers and production schedules, and usually somewhere inside a distribution system that hasn’t been opened in years. Our commercial work starts with knowing the actual condition of that system — infrared inspections under load, fuse and breaker condition, real load numbers — and maintaining it on a cycle, so the failures get scheduled by us instead of by the equipment.
It’s engineer-led work — our principal is a licensed master electrician and a P.Eng. — and it covers distribution and switchgear, planned shutdowns coordinated with the utility and ESA, emergency lighting testing and sign-off, and the service work in between. See our commercial electrical services →
Office fit-outs in Toronto
When a company takes a new floor or rebuilds the one it has, the electrical decides where people can sit, meet and plug in. As an office fit out electrician in Toronto, we build that layer: the distribution, the circuits and the lighting the finished office runs on.
An office electrical fit out starts at the panel: capacity checked against the real load, distribution sized for the floor plan, and dedicated circuits run to where the workstations, printers and kitchen equipment actually land, so the space doesn’t start life on extension cords and tripping breakers. Boardrooms get the power their screens and video calls need, at the table and at the wall, and server and IT rooms get clean, dedicated circuits with room to grow.
Workstation power
Floor boxes, wall and furniture-feed circuits for desks and benching, plus dedicated circuits for copiers, printers and kitchen equipment — placed from the furniture plan, not guessed after it.
Office lighting installation
Pot lights, track and pendant lighting fitted out to the design, with dimming and lighting controls — the commercial lighting installation half of the fit-out, matched to how each room is actually used. Lighting installation →
Boardroom & IT room power
Power for displays, video conferencing and in-table connections in meeting rooms, and dedicated, protected circuits for server racks and network gear.
Phased, occupied, after-hours
Fit-outs sequenced around a working office: the noisy work and the power-off work done evenings or weekends, occupied areas kept running, and ESA permits and inspections booked into the schedule, not bolted on.
Every office fit out is quoted in writing before it starts, permitted where it needs to be, and inspected. The electrical is cheapest to get right before the drywall closes. See our commercial electrical services →
Retail fit-outs and store lighting
A store’s electrical is part of how it sells: the light on the product, the sign over the door, the till that never goes down mid-transaction. As a retail fit out electrician, we wire shops, showrooms, restaurants and cafés across Toronto — from an empty shell, or a previous tenant’s leftovers, to opening day.
Retail store electrical is mostly timing and placement. Display and accent lighting has to land where the merchandising will be, track heads aimed and dimmed for the product, not the ceiling grid. Checkout counters need their own reliable circuits — POS terminals and payment systems aren’t loads you share with a kettle. And the storefront, window lighting and signage power are what the street sees.
Display & accent lighting
Track, spot and feature lighting installed and aimed for displays, shelving and fitting rooms — store lighting installation planned with the layout, so the product is lit, not just the room.
Signage & storefront power
Power for fascia and window signs, storefront lighting, and the timers and controls that run them after close.
POS & checkout circuits
Dedicated circuits for tills, payment terminals and back-office equipment, so the checkout keeps working at the busiest hour.
Restaurants & cafés
Kitchen equipment circuits, dining-room lighting and controls, and patio power — fitted out around ESA and landlord requirements.
Landlord drawings, ESA permits and inspections are part of the job, and the work is phased to your opening date, including the nights and weekends retail fit-outs usually demand. See retail fit-outs on our commercial page →
Industrial power and machinery hookups
The same buildings-first discipline runs to industrial scale. As an industrial electrician in Toronto, we connect and maintain the equipment production runs on: machinery hookups, three-phase power distribution, transformers, and motor circuits sized and protected for the load they actually draw.
And as an industrial electrical contractor, the work is planned around production, not against it — hookups and distribution changes sequenced with planned shutdowns, so a line stops when the schedule says, not when a fault decides. It is the work behind the Meridian Road maintenance program above, extended to the machines themselves. Industrial automation and machinery power →
Toronto neighbourhoods we serve
Our office is at Glenlake Avenue in High Park North — Toronto work starts close to home and runs citywide.
Beyond Toronto we cover Etobicoke, North York and Mississauga — see all service areas. Running a business or a building instead of a home? That’s our commercial electrical work.
Toronto’s buildings, electrically
Toronto’s residential stock spans a century of wiring practice, and most of our work starts with that history. The west-end homes around us were built when a service entrance, a fuse panel and a few circuits were plenty. Many still run 60- or 100-amp services, and knob-and-tube still turns up in walls and attics that haven’t been opened since — we found live runs in a Junction Triangle home just this fall, in a house whose panel had been “modernized” around it.
The city’s commercial and industrial stock tells the same story at a bigger scale: buildings whose distribution was sized for another era’s loads, added to over decades, and documented — if at all — in panel schedules nobody fully trusts anymore. It’s why the maintenance work matters: a 1,200-amp three-phase service, like the Meridian Road building’s, rewards exactly the same discipline as a century home’s fuse panel. Find the real condition first.
Overhead services are the other Toronto constant: masts and clevises holding Hydro’s lines against a century of wind, ice and tree growth, on hardware the homeowner owns. And at the other end of the city’s housing, condo towers bring their own electrical world — concrete ceilings, ageing dimmers, and racks of Sonos and Lutron gear installed when the building was new and now reaching the age where things fail together.
Different houses, same discipline: find the real condition first, quote it in writing, then do the work once.
Toronto questions, answered
What does an electrician in Toronto cost?
Are you licensed? What does ECRA/ESA 7014948 mean?
My Toronto home has knob-and-tube wiring. What should I do?
What’s involved in upgrading to a 200-amp service?
Do you work in condos and outside Toronto?
Do you maintain electrical systems for commercial buildings?
Do you do electrical for office and retail fit-outs in Toronto?
Can you test and sign off our emergency lighting?
Get a Toronto electrician who knows these buildings
Tell us what’s happening — a photo of your panel or your service hardware helps more than anything — and we’ll come back with a written quote and a plan.
We are among the best in the business.
3e Electrical Construction is based at 255 Glenlake Ave, Suite 1007, Toronto — serving the city and the west GTA. See all service areas.
Prices are subject to change without notice. Errors and omissions excepted. All prices plus HST unless stated otherwise.



