Condo Lighting in Toronto & the GTA

Condo balcony lighting, brought to life

This is the vision: a Toronto condo balcony at dusk, a warm LED strip glowing under the glass railing and the city doing the rest — all of it run on Lutron Caséta, on at sunset and dimmed from your phone. We install it as one package, the Caséta Evening Package.

Sound on for the full feel — and yes, this is a concept rendering of the package in action.

What you can do in a condo

Three upgrades that change how a condo feels, all from 3e projects.

A kitchen that lights your work

Pot lights in the bulkhead plus under-cabinet lighting put light on the counters and the sink, where you actually work. No more cooking in your own shadow.

Pendants and track, done properly

Dome pendants over the table, track lighting for open-plan rooms, all of it installed on a concrete ceiling. Fixtures sized for condo ceilings, hung straight and level, on dimmers that do not buzz.

A balcony you will actually use

Low-voltage LED under the railing turns a dark balcony into an evening room. Weatherproof, on a dimmer or a smart switch, and within condo rules.

Condo realities, handled

Condos have rules houses do not. We work inside them every week. Condo boards ask for a licensed electrical contractor for a reason — the licence, the insurance and the permit record are what protect the building.

Featured condo projects

Lighting a condo with concrete ceilings

Most Toronto condos have concrete slab ceilings. There is no cavity above them, and the slab cannot be cut.

That changes the plan, not the result. Concrete ceiling lighting is designed on the surface — the wiring goes on the ceiling, not in it — and done neatly it reads as design, the loft look, not as a compromise. What actually works on concrete:

• Track lighting on a concrete ceiling — one existing ceiling outlet can feed a track that brings light across a kitchen, a table, or an open-plan room.
• Pendants — hung from rated anchors, including over an island or table where there was no light before.
• Surface-mounted downlights — shallow fixtures mounted flat on the slab, giving a clean pot-light look without cutting into concrete.
• Surface conduit runs — planned as part of the look, painted to match, so a new light can go where the room actually needs it.
• Pot lights where a bulkhead or dropped section exists — if part of your ceiling is framed down, that section can take recessed lights as part of the wider lighting project.
• Cove and LED strip lighting — soft, indirect light where direct fixtures do not suit the room.

Drilling small anchor holes for fixtures and track is normal work. Cutting or channelling the slab for wiring is structural — condo boards generally do not allow it, and we do not do it. We plan around the slab, your building’s rules, and ESA permit requirements, then quote the full project first. That quote comes from a licensed electrical contractor who works in Toronto condos every week — concrete ceilings are our normal, not our exception.

We quote it. You approve it. We do it. ⚡

Questions answered, straight talk.